SATA 3.5\" Hard Drive Enclosure with USB 2.0 Output, Cool Look ALUMINUM

Native SATA drive Enclosure with USB 2.0 Output, Cool Look ALUMINUM works With Vista The aluminum construction absorbs the heat from the drives and keeps them running well within their design specifications without noisy fans! It has solid aluminum body, very slim (just one inch. see picture). 100% Plug & Play. Works with PC and MAC. It Works with all 3.5" standard SATA or SATA II desktop hard drive (including Western Digital, IBM, Seagate, Samsung, Hitachi, Maxtor and much more). UP to 1,500GB. It is the coolest device to carry large amount of data. It uses the best chipset to ensure best compatibility. AL-SATA-3A series USB 2.0 3.5" SATA Hard Disk Drive External Enclosure, you can back up your vital data, transfer all of your favorite videos and songs even carry that important presentation with you quickly and easily. SATA to USB 2.0 Aluminum Enclosure Orange Strip

Worlds First Mini Size Direct Connect SATA I / SATA II Hard Drive Enclosure

SATA to USB Hard Drive Case for MAC and Windows Users

The new generation USB2.0 to SATA HDD Case, a slim, stylish and powerful aluminum enclosure for your 3.5¨ SATA or SATA II hard drive. Features fanless design and passive cooling, ideal for multi-media users and quiet working environments. Similar USB Hard Drive Enclosure Also Available for IDE ATA-66 AT-100 ATA-133 Click Here

Supports Plug and Play / Hot-Plug

There is NO WAY you will find a Smaller SATA Drive Enclosure, Enywhere!

Dimension 175(L) x 118(W) x 30(H)mm Native SATA 3.5 inch Drive to USB 2.0 Solution, Slim Compact Aluminum Enclosure. Tested with All SATA and SATA II hard drives from 80GB up to 1,500GB Capacity! Convert any Serial ATA (SATA) drive into a Cool Slim Portable USB 2.0 Version with best chipset performance! Specifications:

Suitable for SATA hard disk type:

3.5" Serial ATA HDD SATA I abnd SATA II

Interface:

USB2.0

Power supply:

Adapter

Adapter voltage input:

AC 100~240V, 50~60Hz

Adapter voltage output:

DC 5V/12V

LED display:

Power on"(green) and "HDD"(Red)

Material:

Aluminum

USB2.0 Cable 90cm

SATA to USB Hard Drive Enclosure

System Requirements: Windows 98, ME, 2000, 2003, XP or Vista MAC OS X.3.6 or greater Installation: 1.Remove two screws in back and pull out the back part 2.Plug the side case in HDD side 3.Plug the Serial ATA cable & Serial ATA power cable in the seat of the HDD back 4.Carefully position the 3.5" HDD & the back part PCB inside the aluminum case 5.Fix the screws tightly 6.Connect the power cable and USB2.0 cable to the external box and PC BACK IN STOCK